GRASS VALLEY NV9649 User Manual page 25

 The NV9649, by default, acquires its IP address through DHCP on the NV9000's
panel/router network. You can use the Panel IP Configuration Utility to force the
panel to have a static IP address.
If (in setup mode) you do not see your designated panel ID in the 'Preset' display field,
you have either not initialized the panel or no configuration has been created for your
panel in NV9000-SE Utilities.
3 Is the NV9000 system controller actually running? With the typical noise levels in a
facility, it can sometimes be difficult to tell. Use the 'System' pages of NV9000-SE
Utilities to make the determination.
4 Is NV9000-SE Utilities installed and operating? If so, can you upload a configuration to
the specified panel?
5 Does the configuration actually work? Is it useful? Can the operator perform takes and
perform other operations?
You might want to consider how well your operator interface works in addition to the basic
question of whether it works.
NV9649
User's Guide
15