Table of Contents
Advertisement
Configuration
Button Definitions
"Source is master" is used for duplication, or broadcast routing, on a machine control
level. "Destination is master" is for machine-to-machine editing. If you do not select the
"source master default" option, you can place a 'Source is Master' button on the panel.
• Hide sources not configured on this panel.
Causes the names of source devices that are not presently configured for this particular
panel to be effectively hidden. When another panel changes the source to one not
configured for this panel, this panel displays asterisks instead.
• Return all-level after take and timeout.
If you check this box, the panel will revert to all-level state after the timeout period
following a breakaway take.
If you leave this box unchecked, the panel will not revert to an all-level state.
The default timeout period is 30 seconds. See
• Return from breakaway status after timeout.
If you check this option, a panel that is in level mode will leave level mode after the
timeout period.
The default timeout period is 30 seconds. See
• Use continuous scrolling.
If you check this box, the panel will scroll source or destination devices continuously (or
indefinitely). That is, the display will show the first device in the list following the last
when you are scrolling up, and will show the last device after the first if you are scrolling
down.
If you leave this box unchecked, the panel will stop scrolling when it reaches either the
beginning or end of the list.
This option does not affect scrolling of salvos when the panel is in salvo mode or levels
when the panel is in level mode.
• Use asterisk for breakaway.
If you check this box, the software places asterisks in the 8th character position of
source names that contribute to breakaway.
If you clear this box, the software leaves source names unchanged.
• Clear Preset Mapping.
If you check this box, all preset mappings (channels, or levels, mapped and tieline
presets) clear at the beginning of each suffix button press.
If you clear this check box, all preset mappings are retained. Note that the most recently
made tieline preset (if one was made) is retained even if the ultimately taken source
does not require a tieline. The tieline is wasted.
Button Definitions
The NV9649 panel can be configured to operate under 3 behavioral models:
• 'Panel Server' mode.
• 'NV9609 Panel' mode.
• 'LCD XY/MD' mode.
46
Note: a 'Source is Master' button is a toggle that reverses the direction of data
routing for devices used in data level (machine control) takes.
LCD Buttons
on page 141.
LCD Buttons
on page 141.
Advertisement
Table of Contents
