Button Functions For Server Mode - GRASS VALLEY NV9649 User Manual

Button Functions for Server Mode

These are the button types available for NV9649 configurations under the server model:
Type
Assign
Broadcast
Description (under Server Mode)
When the panel is in destination mode, the button is used to assign a
selected destination to an NV9648 control unit.
When the panel is in source mode, the button is used to assign a preset
source to a source button of an NV9648 control unit.
(Pressing a source button of the desired NV9648 control unit completes the
assignment.)
See Operating Methods, on page 112 for detail.
Changes made to the assignments made for all NV9648 clients are preserved
in the NV9000 system controller and persist across power cycles. We call
these sets of client assignments "setups. " Up to 12 setups may be defined
and used. When you use the 'Assign' button, it applies to the currently
selected setup and other setups remain unaffected. You may select one of
the defined setups using the panel's menu (if it has one). See
the Server Model, on page 116
On the data (machine control) level, the button enables a broadcast take to
an additional controlled device, after a broadcast route has been initiated
with a "source is master" control-level take to the first controlled device.
The button definition has no fields to configure.
A broadcast button is useful in dubbing applications or when a backup
(redundant) device is in use. See
See also the Source Master
Broadcast Routes, on page 90.
button, following.
NV9649
User's Guide
Menus under
49