Table of Contents
Advertisement
Operation
Buttons for the NV9609 Model
would probably be VTR_13, subject to the device definitions in the NV9000
configuration.) Scrolling devices is possibly only when a category selection is in
progress.
• Scrolling salvos in salvo mode: 'Page Up' moves to the salvo with the next higher index
in the panel's salvo list. (It is expected that if the panel has a salvo button, it also has a
salvo list.)
• Scrolling levels in level mode: 'Page Up' moves first to "All Level" and then to the last
level and then to previous levels defined for the destination. Using the 'Page Up' button,
you can cycle through all the levels (including "All Level") indefinitely.
Panel Lock
The button prevents accidental changes to the panel settings, especially router crosspoints.
When the panel is locked, the button array becomes blank except for the Panel Lock button
which becomes high tally amber.
The button is a toggle: press the panel lock button again to revert the panel to its previous
state.
Previous Source
The button presets the previously routed source to the currently selected destination. To
restore the previous route, you must next press 'Take' assuming you have not changed the
destination. This function is useful when you make a route in error.
The button does not restore the previous destination. If you changed the destination and
press 'Previous Source' , the take will not restore the previous route.
Quick Source
A quick source button selects a source and performs an immediate take (to the destination
of the control unit in which the quick source button is located).
Quick source and source buttons are similar, except that the quick source performs a take.
Be aware of which buttons are quick sources so you do not perform an accidental take.
Normally, the button text is the source's mnemonic, but the configurer can assign any text
to the button.
Salvo
The salvo button places the panel in salvo mode. In salvo mode, you can the knob to select
a salvo from the salvo list configured for the panel (as a panel option). When the desired
salvo is selected, press a 'Take' button to execute the salvo. The panel then returns to
normal operating mode.
You can also press 'Page Up' and 'Page Down' buttons to browse through the salvo list.
Pressing a button other than 'Take' , 'Page Up' , or 'Page Down' returns to its normal operating
mode.
Source
The button selects a specific source. The source name appears in the 'Preset' display.
110
Advertisement
Table of Contents
