Table of Contents
Advertisement
Operation
Hold
When the panel is not in level mode, takes occur on either all levels or selected levels of the
current destination. If the panel has multiple 'Level' buttons, you can perform multiple-
level breakaway when the panel is not in level mode.
Level mode is available only under the NV9609 model.
Level Grouping
Virtual levels can be grouped. This diagram illustrates grouping:
Video
HD
There are two types of virtual levels: basic and abstract. Basic virtual levels are those that
correspond to actual physical levels. Abstract virtual levels do not correspond to physical
levels. In the illustration, the 5 "Audx" levels are grouped under 'Audio' . The two video levels
are grouped under 'Video' .
The levels 'Video' and 'Audio' are abstract levels; the other levels are basic levels.
If you have chosen a destination whose basic levels are grouped, the panel's selection
buttons show only the basic level names. (Other panels can show level group names.)
We discuss level groups — a feature of the router control system — only to state that the
NV9649 does not have support for level groups.
Hold
Under the LCD XY/MD model, hold mode (and hold buttons) apply in both X-Y mode and
multi-destination mode.
Breakaway
In X-Y mode, a hold button retains breakaway levels after a take.
Simply press the hold button at any time before the take.
A hold button is a toggle. Press it once to put the panel in hold mode; press it again to
remove hold mode.
Multi-Destination Mode
In multi-destination mode, hold mode allows you to select more than one MD destination
at a time.
Category Selection
In the NV9000 system, devices are assigned to categories, where the devices within the
categories are either numbered or identified by alphanumeric suffixes. For instance, a
category representing cameras might be CAM and the cameras in the category might be
named CAM1, CAM2, and so on.
88
SD
Aud1
Aud2
Audio
Aud3
Aud4
Aud5
. . .
Advertisement
Table of Contents
