GRASS VALLEY NV9649 User Manual page 83

Type Description (under NV9609 Mode)
Menu This button puts the NV9649 panel in menu mode and displays a menu on
the buttons that provides access to a variety of panel functions. Without the
button, the operator has no access to the menu functions.
By pressing certain buttons, the operator makes menu selections and may
enter data (such as panel ID) or change brightness values. When the panel is
in menu mode, the menu button cycles through the functions of the menu.
See Menu Mode
The button definition has no fields to configure. Its legend is arbitrary.
Name Set The button toggles the panel between its default name set and the "system
Toggle name" set. One or the other becomes the active name set.
The button definition has no fields to configure. Its legend is arbitrary.
If the default name set is the system name set, the button would be a no-op.
Therefore configurers should not create a 'Name Set Toggle' button if the
default name set is 'System Names' .
The status, preset, or destination displays use the active name set — either
the default name set (aliases) or the system name set. However, that when
the panel is displaying aliases, and a device does not have an alias, the panel
displays the system name.
Page Down The button scrolls down.
Scrolling devices within a category: 'Page Down' moves to the next lower
device in the category's device list. (Example: if the current device is CAM_4,
the next lower device would probably be CAM_3, subject to the device
definitions in the NV9000 configuration.) Scrolling devices is possibly only
when a category selection is in progress. Whether the list wraps around at
the beginning or end is governed by the 'Use Continuous Scrolling' panel
option.
Scrolling salvos in salvo mode: 'Page Down' moves to the salvo with the next
lower index in the salvo list. A valid salvo list must have been specified in the
panel options.
Scrolling levels in level mode: 'Page Down' moves first to "All levels" and then
to the first level and then to the next levels defined for the destination. Using
the 'Page Down' button, an operator can cycle through all the levels
(including "All Levels") indefinitely.
The button definition has no fields to configure. Its legend is arbitrary.
on page 116.
NV9649
User's Guide
73