Type
Description (under LCD XY/MD Mode)
XY Display
The 'X-Y Display' button displays current route status — in X-Y mode, MD
mode, or in limited X-Y mode. Pressing this button has no effect. It also
displays other messages in other circumstances, as required.
Prior to a take, the 'X-Y Display' button displays the preset destination name
(and turns low-tally red if that destination is locked or protected by another
user.)
After a take, the 'X-Y Display' button also displays the current source name.
If there is no destination selected, the 'X-Y Display' button says so.
The button definition has no fields to configure. Its legend is defined by the
system and varies in context.
XY/MD
Switches the panel between X-Y and multi-destination modes.
Mode
The configuration page lets you specify a color for this button, but the color
you specify is ignored. The button is always green for XY mode and amber for
multi-destination mode.
The button definition has no fields to configure. Its legend is defined by the
system and varies in context.
NV9649
User's Guide
61