Table of Contents
Advertisement
Normally, the button text is the source's mnemonic, but the configurer can assign any text
to the button.
Salvo
The button presets a salvo. (Subsequently pressing the 'Take' button actually executes the
salvo.)
The default button text is the salvo name but the button can have any legend.
Save Preset
This button is a toggle: it enables or disables "save preset" mode. When this function is
enabled (and the button is high tally), whatever is on preset is retained on preset after a
take. When the function is disabled (its button is low tally), whatever is on preset is
discarded after a take.
The default button text is "Save Preset" but the button can have any legend.
Selection
In X-Y mode, the display shows levels and selection buttons select or deselect levels. In MD
mode, the display shows MD destinations and the selection buttons select or deselect MD
destinations. A selection button is high-tally when its associated level or MD destination is
selected and low-tally when it is not selected. Sometimes selection buttons are dark,
meaning that the level or MD destination is either not in use or not available.
X-Y Mode
When the panel is in X-Y mode, a selection button represents a virtual level present on the
alphanumeric display. Pressing one or more selection buttons selects (or deselects) the
levels associated with the buttons. A marker appears in the right-most column of the
display for selected levels.
When all levels are selected, pressing a level button turns them all off except the one
pressed.
If there are more than levels than buttons, scrolling is enabled.
Deselecting virtual levels in X-Y mode prepares a breakaway.
Hold mode preserves the level selection after a take.
MD Mode
When the panel is in MD mode, a selection button represents an MD destination. If there
are more MD destinations than selection buttons, scrolling is enabled. Pressing a selection
button selects the destination.
Certain MD destinations might be unassigned. They appear blank in the display and
the corresponding buttons are dark.
When your panel is in hold mode, you can select more than one destination at once. If your
panel is not in hold mode, MD destinations are mutually exclusive: you can select only one
at a time.
NV9649
User's Guide
103
Advertisement
Table of Contents
