Environmental Specifications
Environmental specifications for the NV9649.
Specification
Operating temperature
Relative humidity
Cooling
Defaults
Initial Panel State
Destination: the configured default.
Buttons: low-tally is 40% brightness by default and stays at its most recent setting.
Configuration Page
The initial NV9649 configuration has no buttons defined. The default panel options are:
Behavioral model:
Default mode:
Release mode:
Default destination:
Preset monitor:
Status monitor:
Data routing:
Salvo list:
Default name set:
Use continuous scroll:
Other options:
The tally inputs and outputs are all initially undefined.
DHCP
The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a
fixed IP address using the Panel IP Configuration Utility.
Detail
0–40° C, ambient.
0 to 90%, non-condensing.
No fan required.
LCD XY/MD mode.
Multi-destination mode.
Normal.
None.
None
None
Automatic.
None
System names
Enabled (check box checked)
All disabled (check boxes clear) except 'Src/Dst Immediate Take' .
NV9649
User's Guide
137