GRASS VALLEY NV9649 User Manual page 129

'Save Set-Up'
This button presents the 'Save' menu. The 'Save' menu lets you save the current setup as
one of the named setups. This button is amber and so are the buttons of the 'Save' menu:
DEFAULT FRED DOUG
SET–UP SET–UP SET–UP
IVAN AHMED
SET–UP SET–UP
The button for the currently active setup is high-tally.
To go back to the 'Manage Configs' menu, press 'Exit Save' at the right.
To save the current setup, simply press the button for any named setup.
Be cautious: doing so overwrites all the client assignments of the named setup you select.
The menu presents a warning to which you must respond before you can proceed:
PUSH IF
YOU ARE
SURE!
Press the red button (that read "Push if you are sure") to continue with the save.

Whenever you recall, save, or clear any named setup, that setup becomes the current
setup. Subsequent source and destination assignments are recorded in the current
setup and other setups are not affected.
'Clear Set-Up'
This button (in the 'Manage Configs' menu) presents the 'Clear' menu. The 'Clear' menu lets
you revert all the NV9649 clients to their configured assignments with respect to one of the
named setups. (Other named sets remain unaffected.)
The "configured assignments" are the ones defined (in NV9000-SE Utilities) in the
configuration of the NV9000 control system in effect.
This button is yellow and so are the buttons of the 'Clear' menu:
DEFAULT FRED DOUG
SET–UP SET–UP SET–UP
IVAN AHMED
SET–UP SET–UP
The button for the currently active setup is high-tally.
EXIT
SAVE
EXIT
MENU
CANCEL
SAVE
EXIT
SAVE
EXIT
CLEAR
EXIT
MENU
NV9649
User's Guide
119