GRASS VALLEY NV9649 User Manual page 39

2 Click the 'Edit Category List' button. The 'Category Index Selection Editor' window
appears:
On the left is a list of all categories defined in the NV9000 system. On the right is a list of
the categories in the list you are defining. Initially the list for the panel configuration is
empty.
3 Modify the list.
To add categories to the list, select one or more categories on the left and copy it to the
right, using either the 'Append' button, the 'Insert' button, or the 'Replace' button.
The categories are either source categories or destination categories or both, as
indicated by check boxes on the left. To select or unselect a category, click the box. A
selected category has a check mark in the box.
The 'Append' button appends the selected categories to the end of your list.
The 'Insert' button places the selected categories immediately above whatever
category you have highlighted on the right.
The 'Replace' button replaces whatever categories you have highlighted on the right
with the selected categories from the left.
The 'Remove' button removes highlighted categories from the right.
At the bottom right are 'Move Up' and 'Move Down' buttons. You can use these to
adjust the position of any category in the list.
Also at the bottom right is a 'Reindex All' button. Click this button to renumber the
categories consecutively (in the order in which you placed them in the list) and without
gaps in the ordering.
When you have finished editing the category list, click OK to save the list. You can click
'Cancel' if you want to discard any changes you have made to the list.
You will have actually defined two lists, one for sources and one for destinations. These
lists define the categories through which the operator may browse using the knob at
the front of the panel.
NV9649
User's Guide
29