Repair; General Notes; Spare Parts - Endress+Hauser HART Proline Promass E 200 Operating Instructions Manual

Repair

90
13 Repair
13.1

General notes

Repair and conversion concept
The Endress+Hauser repair and conversion concept provides for the following:
• The measuring devices have a modular design.
• Spare parts are grouped into logical kits with the associated Installation Instructions.
• Repairs are carried out by Endress+Hauser Service or by correspondingly trained customers.
• Certified devices can be converted into other certified devices by Endress+Hauser Service or at
the factory only.
Notes for repair and conversion
For repair and modification of a measuring device, observe the following notes:
• Use only original Endress+Hauser spare parts.
• Carry out the repair according to the Installation Instructions.
• Observe the applicable standards, federal/national regulations, Ex documentation (XA) and
certificates.
• Document every repair and each conversion and enter them into the W@M life cycle management
database.
13.2

Spare parts

• Some interchangeable measuring device components are identified by an overview sign. This
contains information about the spare part.
• The spare part overview sign is located in the connection compartment cover of the device and
contains the following information:
– A list of the most important spare parts for the measuring device, including their ordering
information.
– The URL for the W@M Device Viewer (www.endress.com/deviceviewer):
There, all spare parts for the measuring device are listed, including the order code, and can be
ordered. If available, the corresponding Installation Instructions can also be downloaded there.
1
2
å 18 Example for "Spare part overview sign" in connection compartment cover
1 Measuring device name
2 Measuring device serial number
Measuring device serial number:
• Is located on the device nameplate and the spare part overview sign.
• Can be read out via the "Serial number" parameter in the "Device information" submenu.
Spare parts for
Item Spare part Part no. / structure
1 Sensor
2 Main electronic
3 I/O module
4 Cover (front)
5 Cover (right)
Transmitter
6
7 Display
8
9
10
6
2
3
7 5
4
1
Proline Promass E 200 HART
A0014017
Endress+Hauser