Documentation; Standard Documentation; Supplementary Device-Dependent - Endress+Hauser HART Proline Promass E 200 Operating Instructions Manual

Proline Promass E 200 HART
Endress+Hauser
1.3

Documentation

1.3.1

Standard documentation

Document type
Technical Information
Brief Operating Instructions
Description of Device Parameters
The document types listed are available:
• On the CD supplied with the device
• In the Download Area of the Endress+Hauser Internet site: www.endress.com ® Download
1.3.2 Supplementary device-dependent documentation
If operating the device in SIL applications, hazardous areas or in accordance with the Pressure
Equipment Directive, comply strictly with the instructions in the supplementary documentation.
The supplementary documentation is an integral part of the device documentation.
Document type
Safety Instructions
Information on the Pressure Equipment
Directive
Functional Safety Manual
Installation Instructions
The document types listed are available:
• On the CD supplied with the device
• In the Download Area of the Endress+Hauser Internet site: www.endress.com ® Download
Purpose and content of the document
Planning aid for your device
The document contains all the technical data on the device and provides an
overview of the accessories and other products that can be ordered for the device.
Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information from
incoming acceptance to initial commissioning.
Reference for your parameters
The document provides a detailed explanation of each individual parameter of
the operating menu. The description is aimed at those who work with the device
over the entire life cycle and perform specific configurations.
Device particularities and document content
Operation in hazardous areas
The document contains all the necessary information for the safe operation of the
device in hazardous areas, and explains how the device can be identified as an
Ex system from the device nameplate.
Operation in accordance with the Pressure Equipment Directive
The document contains all the necessary information for the safe operation of the
device when used in accordance with the Pressure Equipment Directive, and
explains how the device can be identified as pressure equipment from the device
nameplate.
Operation in SIL applications
The document contains all the necessary information for the safe operation of the
device in SIL applications, such as settings and installation instructions.
Ordered accessory
The Installation Instructions contain all the information needed to install the
ordered accessory or spare part.
Document information
7