Commissioning; Function Check; Switching On The Measuring Device; Setting The Operating Language - Endress+Hauser HART Proline Promass E 200 Operating Instructions Manual

Commissioning

50
10 Commissioning
10.1

Function check

Before commissioning the measuring device, ensure that the post-installation and post-connection
check have been carried out.
• Checklist for "Post-mounting check" (® ä 23)
• Checklist for "Post-connection check" (® ä 27)
10.2

Switching on the measuring device

After a successful function check, switch on the measuring device.
After a successful startup, the local display switches automatically from the startup display to the
measured value display.
If nothing appears on the local display or a diagnostic message is displayed, refer to the chapter
on "Diagnostics and troubleshooting" (® ä 80).
10.3

Setting the operating language

Factory setting: English or ordered local language
X X X X X X X X
Main menu
X
20.50
0104-1
Language
English
Display/operat.
Setup
Language
English
Ã
Deutsch
Español
Français
Language
à English
Deutsch
Español
Français
Proline Promass E 200 HART
0104-1
0104-1
Hauptmenü 0104-1
Sprache
Deutsch
Anzeige/Betrieb
Setup
Endress+Hauser
A0013996