Filtering The Event Logbook; Overview Of Information Events - Endress+Hauser HART Proline Promass E 200 Operating Instructions Manual

Diagnostics and troubleshooting
88
In addition to the operation time of its occurrence, each event is also assigned a symbol that indicates
whether the event has occurred or is ended:
• Diagnostic event
– : Event has occurred
– : Event has ended
• Information event
: Event has occurred
Calling up and closing the remedial measures
1. Press F.
à The message for the remedial measures for the selected diagnostic event opens.
2. Press S + O simultaneously.
à The message about the remedial measures closes.
• About the structure of the remedial measure message (® ä 82)
• For filtering the displayed event messages (® ä 88)
12.6.2

Filtering the event logbook

Using the Filter options parameter, you can define which category of event messages is displayed
in the Events list submenu.
Navigation path
Diagnostics ® Event logbook ® Filter options
Filter categories
• All
• Failure (F)
• Maintenance required (M)
• Function check (C)
• Out of specification (S)
• Information (I)
12.6.3

Overview of information events

Unlike a diagnostic event, an information event is displayed in the event logbook only and not in
the diagnose list.
Information
event
I1000 -------- (device OK)
I1079 Sensor changed
I1089 PowerOn
I1090 Configuration reset
I1091 Configuration modified
I1092 Data logging cleared
I1110 Write protection switch changed
I1111 Density adjust. error
I1137 Electronics changed
I1151 History reset
I1154 Minimum/maximum terminal voltage reset
I1155 Electronics temperature reset
I1156 Trend block memory error
I1157 Memory content events list
Proline Promass E 200 HART
Event text
Endress+Hauser