Endress+Hauser HART Proline Promass E 200 Operating Instructions Manual page 67

Proline Promass E 200 HART
Endress+Hauser
Parameter overview with brief description
Parameters
Mass flow unit Select the unit for mass flow.
Result
The selected unit applies for:
– Current outputs
– Low flow cut off
– Simulation process
Mass unit Select the unit for mass.
Result
The selected unit is taken
from:
Mass flow unit
Volume flow unit Select the unit for volume
flow.
Result
The selected unit applies for:
– Current outputs
– Low flow cut off
– Simulation process
Volume Select the unit for volume.
Result
The selected unit is taken
from:
Volume flow unit
Corrected volume flow unit Select the unit for corrected
volume flow.
Result
The selected unit applies for:
– Current outputs
– Low flow cut off
– Simulation process
Corrected volume unit Select the unit for standard
volume.
Result
The selected unit is taken
from:
Corrected volume flow unit
Density unit Select the unit for density.
Result
The selected unit applies for:
– Current outputs
– Low value partial filled
– High value partial filled
– Simulation process
– Density adjustment (in the
Pressure unit
Description
Unit choose list
variable
Unit choose list
Unit choose list
variable
Unit choose list
variable
Unit choose list
Unit choose list
pipe detection
pipe detection
variable
Expert menu)
Commissioning
Selection/ Factory setting
User entry
Country-dependent:
• kg/h
• lb/min
Country-dependent:
• kg
• lb
Country-dependent:
• l/h
• gal/min (us)
Country-dependent
• l
• gal (us)
Country-dependent:
• Nl/h
• Scf/min
Country-dependent:
• Nl
• Scf
Country-dependent
• kg/l
• lb/cf
67