Ricoh PRIPORT VT 2000 Series Service Manual page 292

10.2 SECOND PAPER EXIT SENSOR ADJUSTMENT
[D]
A]
[C]
VT2300/VT2500 Main Control Board
Purpose : To ensure that the sensor detects correct paper delivery and that
1. Remove the front cover from the machine.
2. Confirm the following items:
a. When the shelter plate is removed and the master eject unit is closed,
VT2100/VT2130/VT2150)
b. When the shelter plate is installed and the master eject unit is closed,
VT2100/VT2130/VT2150)
c. When a sheet of paper is positioned over the second paper exit sensor
VT2300/VT2500
3. If any of the above items is incorrect, adjust the sensor by turning VR102
[C] for VT2300/VT2500 (VR101 for VT2100/VT2130/VT2150) on the main
control board [D].
the jam indicator blinks and the machine stops when a paper wrap
or exit misfeed occurs
LED104 [A] for VT2300/VT2500 (LED101 for
LED104 [A] for VT2300/VT2500 (LED101 for
[B] and is in contact with the shelter plate, LED104 for
(LED101 for VT2100/VT2130/VT2150) is ON.
is OFF.
is OFF.
5-79
28 February '91
[B]