Ricoh PRIPORT VT 2000 Series Service Manual page 186

4. INSTALLATION PROCEDURE COLOR
DRUM VT2000 --M/S/LG (Option)
NOTE: There are three types of color drum units.
Color Drum Type VT2000-M:
Color Drum Type VT2000-LG:
Color Drum Type VT2000-S:
1. Remove the protective sheet [A] from
the drum unit.
2. Remove the tape securing the ink
holder [B].
3. Stick a color indicator seal on the
drum case and the ink holder. The
seal must be the same color as the ink
in use.
4. Remove the drum unit.
a. Leave the master wrapped around
the removed drum to protect the
drum from dust and drying.
b. Keep the removed drum unit in the
drum case.
5. Install the color drum unit.
The color drum indicator
operation panel stays lit when the
color drum is mounted in the machine.
6. Install the color ink.
a. Remove the ink cartridge cap.
b. Insert the ink cartridge into the ink
holder.
For the VT2100/VT2300/VT2500
For the VT2130
For the VT2150
on the
3-19
28 February '91
[A]
[B]