Ricoh PRIPORT VT 2000 Series Service Manual page 303

28 February '91
Component
Right Cutter Switch
(Rear)
Left Cutter Switch
(Front)
First Drum Position
Sensor
Second Drum Position
Sensor
Master Buckle Sensor
Condition
ON condition Master is not cut. (Cutter unit does not move at
(Feeler is all.)
actuated)
OFF condition When the master is cut, indicator "E-01" lights. At
(Feeler is not that time the cutter does not return to the front.
actuated)
ON condition Master is not cut. (Cutter unit does not return
(Feeler is from the rear.)
actuated)
OFF condition When the main switch is turned on, indicator
(Feeler is not "E-01" lights.
actuated)
OFF condition When the main switch is turned on, the drum
(Not interrupted) starts rotating and it cannot be stopped.
* Print (When the Print Start key is pressed)
ON condition
detected.
(Interrupted)
* Master making (When the Master Making
* Print (When the Print Start key is pressed)
OFF condition
* Master making (When the Master Making
(Not interrupted)
* Print (When the Print Start key is pressed.)
* Idling time (Reset key + 0 key)
ON condition
(Interrupted)
* Master eject
When the main switch is turned on, jam indicators
ON condition "C" and
Original feeding and master feeding stops
OFF condition halfway, and jam indicators "C" and
Phenomenon
1. After one sheet of paper is fed, the drum
continues to rotate and paper feed stops.
2. The machine does not stop when the Stop
key is pressed.
3. Paper feed and delivery jams are not
key is pressed)
1. After the new master is wrapped around the
drum and one sheet of paper (trial print) is
delivered, the drum does not stop rotating.
The Stop key does not work.
1. The paper feed solenoid does not work and
the Stop key does not work.
key is pressed)
1. When the Master Making key is pressed, the
drum starts rotating and cannot be stopped.
1. Paper feed solenoid does not work and drum
continues to rotate.
1. Drum does not stop rotating.
1. When the Master Making key is pressed,
master eject indicators "F" and
and the master is not ejected.
blink and cannot be reset.
7-4
blink
blink.