Ricoh PRIPORT VT 2000 Series Service Manual page 288

VT2100/2130/2150 Only:
8. Remove the drive gear [A] and the bearing (2 Allen screws).
NOTE: It is not necessary to remove the drive gear on the VT2300 and the
VT2500 because these models use a timing relay belt [B].
9. Remove the relay gear assembly [C].
10. Loosen the 2 hexagon bolts [D] and remove the pressure cam drive gear
[E].
11. Remove the timing gear assembly [F].
12. Remove the belt tension bearings [G] (1 E-ring).
13. Replace the drum drive belt [H].
[B]
[A]
5-75
[H]
[G]
[F]
[C]
28 February '91
[E]
[D]