Ricoh PRIPORT VT 2000 Series Service Manual page 158

10. INDICATORS/KEYS/PROGRAMS:
VT2300/VT2500
10.1 CHECK PAPER SIZE/DIRECTION INDICATOR
When an enlargement ratio (A4: 115%, 122%, or 141%
127%, or 141%) is selected with the Reduce/Enlarge key, the Check
Paper Size/Direction indicator lights. This indicator turns off when the
Master Making key, Print Start key, or Proof key is pressed and full size
mode or reduction mode is selected.
All keys remain accessible after the Check Paper Size/Direction indica-
tor lights. This indicator simply reminds the customer to check the size
and direction of the paper set on the paper table.
10.2 REDUCE/ENLARGE KEY
The Reduce/Enlarge key can be used when the machine stops. The
reproduction ratio changes as shown below.
A4 version
LT version
10.3 SKIP PAPER FEED SWITCH
The paper feed interval can be set to allow time for the user to remove
prints. This interval can be adjusted with the Skip Paper Feed switch.
The three following steps are available:
• Standard (normal feeding)
• 1/3 rotation (one sheet fed every three drum rotations)
• 1/5 rotation (one sheet fed every five drum rotations)
This function can also be used in Proof Mode.
If the Stop key is pressed before the copier feeds out a print during the
1/3 or 1/5 step interval, the copier returns to the normal feed interval
and a print is fed out soon after the Start key is pressed.
: 71%→82%→93%→115%→122%→141%
: 64%→75%→93%→115%→122%→141%
2-131
28 February '91
LT: 115%,