Ricoh PRIPORT VT 2000 Series Service Manual page 297

28 February '91
10.7 DELIVERY BELT/PAPER EXIT SENSORS
REPLACEMENT
[G]
1. Remove the vacuum unit (See page 5-83).
2. Remove the 2 screws [A] securing the vacuum guide plate.
3. Remove the tension roller [B] (2 screws).
4. Remove the bearing [C] (1 E-ring).
5. Disconnect the first paper exit sensor connector [D].
6. Remove the delivery belts [E].
7. Disconnect the second paper exit sensor connector [F].
8. Turn the vacuum guide plate [G] over.
9. Replace the paper exit sensors [H] (2 screws each).
[H]
[A]
[C]
5-84
[D]
[F]
[B]
[E]