Ricoh PRIPORT VT 2000 Series Service Manual page 204

3.4 SERVICE PROGRAM TABLE: VT2100/VT2130/VT2150
Output Mode:
COUNTER
INDICATION
0001-0 Turns on the drum (10 rpm).
0002-0 Turns on the drum (30 rpm).
0003-0 Turns on the drum (60 rpm).
0004-0 Turns on the paper table drive motor (up).
0005-0 Turns on the paper table drive motor (down).
0006-0 Turns on the vacuum motor.
0007-0 Turns on the master eject solenoid.
0008-0 Turns on the master eject clamper opening solenoid.
0009-0 Turns on the master feed clamper opening solenoid.
0010-0 Turns on the reversing roller solenoid.
0011-0 Turns on the paper feed solenoid and the printing pressure solenoid.
0012-0 Turns on the ink supply solenoid.
0013-0 Turns on the original transport motor.
0014-0 Turns on the master feed motor.
0015-0 Turns on the fluorescent lamp.
0016-0 Master Process Command (Photo LED ON)
0017-0 Reverses the master eject motor (Turn the eject rollers).
0018-0 Turns on the master eject motor (Pressure plate up/down).
0019-0 Turns on the cutter motor (Moves it from front to rear).
0020-0 Turns on the cutter motor (Moves it from rear to front).
0021-0 Turns the image shifting motor in (+) direction.
0022-0 Turns the image shifting motor in ( - -) direction.
0023-0 Turns on the magnetic counter for paper.
0024-0 Turns on the magnetic counter for master.
0025-0 Turns on the drum reverse rotation relay.
0026-0 Magnification ratio : 100% (LED ON)
0027-0 Magnification ratio : 93% (LED ON)
0028-0 Magnification ratio : 82% (A4 version)/ 75% (LT version) (LED ON)
0029-0 Magnification ratio : 71% (A4 version)/ 64% (LT version) (LED ON)
0030-0 Turn on the drum (10 rpm), the paper feed solenoid and the printing
pressure solenoid.
0031-0 Tape dispenser (option) feeds out strips of paper.
0032-0 Turns on the ADF drive motor (Not used).
0033-0 Turns on the ADF original pressure solenoid (Not used).
0034-0 Outputs the thermal head voltage (VHD).
NOTE: 0001-0 to 0006-0 and 0030-0 are not activated when the safety
cover is open.
OUTPUT
4-15
28 February '91