Ricoh PRIPORT VT 2000 Series Service Manual page 220

28 February '91
2.5 EXPOSURE LAMP / HEATER REPLACEMENT
[C]
[A]
[B]
[C]
[C]
[D]
45 o
90 o
1. Slide the scanner unit to the left.
2. Remove the front fluorescent lamp cover (2 screws).
3. Remove the front fluorescent lamp holder [A] (2 screws).
4. Disconnect the 4P heater connector [B].
5. Carefully remove the fluorescent lamp [C] so that it does not contact the
exposure glass.
6. Remove the heater [D] from the fluorescent lamp.
5-7