Ricoh PRIPORT VT 2000 Series Service Manual page 108

[C]
When the drum turns 70 degrees past the second drum position sensor, the
master eject solenoid [A] turns off, separating the lower first eject roller [B]
from the drum.
When the ejected master is between the upper and lower first eject rollers,
it activates the master eject switch [C]. After that, the master is stacked into
the master eject box [D].
NOTE:
The VT2300/VT2500 use a photo reflective sensor instead of a me-
chanically actuated switch [C].
[A]
[D]
2-81
28 February '91
[B]