Ricoh PRIPORT VT 2000 Series Service Manual page 251

28 February '91
7. PAPER FEED SECTION
7.1 PAPER TABLE SAFETY SWITCH ADJUSTMENT
Purpose: To ensure that the paper table safety switch turns on to prevent the
paper table from going up when the paper table is closed.
1. Make sure that the safety switch [A] turns off when the paper table is
opened and that the safety switch turns on when the paper table is
closed. Also, make sure that the distance between the actuator [B] and
the safety switch [A] is 0.3 mm to 0.5 mm when the switch turns on.
2. If incorrect, loosen the screw [C] and adjust the switch bracket position.
3. After adjustment, repeat step 1 again.
4. Also, make sure that the safety switch does not turn on when 1,000
sheets of standard weight paper are placed on the paper table.
[C]
[A]
5-38
[B]
0.3 -- 0.5 mm
[B]