28 February '91
4.3 MASTER EJECT ROLLER DRIVE MECHANISM
[A]
[B]
[C]
[D]
[E]
When the drum turns 20 degrees past the second drum position sensor [A],
the master eject solenoid [B] turns on and the supporter [C] turns counter-
clockwise around the upper eject roller shaft [D]. This forces the lower first
eject rollers [E] to contact the drum.
As the drum turns, the curled trailing edge of the master enters between the
upper and lower first eject rollers. The first eject rollers then peel the master
from the drum.
2-80