Ricoh PRIPORT VT 2000 Series Service Manual page 154

9.4 MISFEED/PAPER WRAP
2nd Drum Position Sensor
Paper Feed Sol.
Printing Pressure Sensor
1st Paper Exit Sensor
Misfeed
If printing pressure is not applied (printing pressure sensor is interrupted)
when the paper feed solenoid turns on, the Misfeed indicator blinks and the
drum stops.
Paper Wrap
If the first paper exit sensor does not turn on when the paper feed solenoid
turns on, the Paper Wrap indicator blinks and the drum stops.
9.5 EXIT MISFEED/PAPER WRAP
1st Drum Position Sensor
2nd Drum Position Sensor
Paper Feed Sol.
Printing Pressure Sensor
2nd Paper Exit Sensor
Exit Misfeed
If the second paper exit sensor and the second drum position sensor turn
on at the same time after printing pressure is applied, the Exit Misfeed indi-
cator blinks and the drum stops.
Paper Wrap
After printing pressure is applied, if the second paper exit sensor turns off
when the first drum position sensor turns on, the Paper Wrap indicator
blinks and the drum stops.
Correct
Misfeed
Correct
Correct
2-127
28 February '91
Paper Wrap
Exit Misfeed
Paper Wrap