Ricoh PRIPORT VT 2000 Series Service Manual page 301

28 February '91
Component
2nd Original Sensor
Original Registration
Sensor
Master Eject Switch
(Sensor)
Pressure Plate
Position Switch
Full Master Detecting
Switch
Paper Table Lower
Limit Sensor
Paper Table Safety
Switch
Condition
When the main switch is turned on, the jam
ON condition
indicators "A" and
(Not interrupted)
impossible.
The original is not inserted automatically, and the
jam indicators "A" and
Master Making key is pressed
(VT2100/2130/2150).
OFF condition The original is fed when the Master Making key is
(Interrupted) pressed, but the leading edge of the original is
damaged because the original transport motor
fails to turn on. The "A" and
blink (VT2300/VT2500).
After the master making process is finished, the
ON condition
Jam indicators "A" and
(Not interrupted)
The original is fed until the leading edge of the
OFF condition original goes 5 cm past the exposure glass, then
(Interrupted) jam indicators "A" and
After the master is ejected and one sheet of
ON condition paper (trial print) is delivered, the jam indicators
(Not interrupted) "F" and
When the master is being ejected, the jam
OFF condition
indicators "F" and
(Interrupted)
The pressure plate does not go up. After one
ON condition
sheet of paper (trial print) is delivered, the
(Feeler is
indicators "F" and
actuated)
OFF condition When the main switch is turned on, the pressure
(Feeler is not plate keeps moving up and down.
actuated)
ON condition When the master eject box is full, the indicators
(Feeler is "F" and
actuated)
OFF condition After master ejecting is finished, the indicators "F"
(Feeler is not and
actuated)
ON condition The paper table does not go down.
(Interrupted)
OFF condition When the paper feed table goes down and stops,
(Not interrupted) the cover open indicator blinks.
ON condition When the main switch is turned on, the cover
(Feeler is open indicator blinks.
actuated)
OFF condition If paper table lower limit sensor is faulty, the
(Feeler is not paper table moves all the way down and locks.
actuated)
Phenomenon
blink and reset is impossible.
do not blink.
blink.
7-2
blink and reset is
blink when the
jam indicators
blink.
blink.
blink.
blink.