Ricoh PRIPORT VT 2000 Series Service Manual page 177

28 February '91
[A]
Paper Paper
Exit Feed
Front Side
2. Place two noise absorbers on the optional table.
NOTE: Make sure that the noise absorbers are positioned on the table
at the locations shown in the above figure.
3.Mount the machine on the optional table (2 screws--packed with table).
4. Remove the tape and string securing the covers and units as shown
above.
a. Open the paper feed tray. Then remove the cushion plate [B] from
the paper feed roller section.
b. Open the master delivery unit. Then remove the tape securing the
paper delivery guide plate.
Paper Paper
Exit
Rear Side
3-6
Feed
[B]