Ricoh PRIPORT VT 2000 Series Service Manual page 110

28 February '91
4.4 MASTER EJECT CLAMPER MECHANISM
[F]
[E]
[B]
[D]
[A]
[C]
[G]
When the drum has turned 230 degrees past the second drum position sen-
sor activation position, the master eject clamper solenoid [A] turns on and
turns the lever [B] counterclockwise. This moves the cam [C] to the drum's
side. After that, the clamper sector gear [D] rides on the cam [C] and the
gear [E] turns counterclockwise opening the master clamper [F] for master
ejection.
When the drum turns 13 degrees past the first drum position sensor, the
main motor turns off. Then, after 0.5 second, the master eject clamper sole-
noid turns off and the spring [G] returns the opening cam to the normal posi-
tion.
2-83