Ricoh PRIPORT VT 2000 Series Service Manual page 167

28 February '91
No. Item
Cutter
16
Section
Master
17
Feed Unit
A guard [A] has been mounted on the cutter unit [B] to
prevent contact with the cutter edge (sharp) during
cutter unit removal or installation.
Counter rollers [C] have been added to prevent new
masters from creasing as they are being fed through
the master reverse section. Also, the reverse roller [D]
has been modified as shown.
[C]
Remarks
[A]
2-140
[B]
[D]