Connection; Connecting A Cellular Phone; Connecting An Audio Device - Sony MEX-BT5700U Operating Instructions Manual

Connection

If pairing has already been achieved, start
operation from here.

Connecting a cellular phone

1
Be sure that both this unit and the
cellular phone are switched to
Bluetooth signal on.
2
Connect to this unit using the cellular
phone.
" "appears when the connection is made.
Connecting to registered devices
1
Press (BT).
The Bluetooth settings menu appears.
2
Rotate the control dial to select
"Device List," then press the select
button.
The list of registered devices appears.
3
Select the device to connect.
4
Select "Handsfree Connect."
"Connection Complete" appears and
connection is complete.
" " appears during connection.
To stop the connection
Select "Handsfree Disconnect" in step 4.
Deleting the registration of a
connected device
Select "Delete" in step 4.
Note
While streaming Bluetooth audio, connection noise
may be heard over playback sound.
Tip
With Bluetooth signal on: when the ignition is switched
to on, this unit reconnects automatically to the last-
connected cellular phone. But automatic connection
also depends on the cellular phone's specification. If
this unit does not reconnect automatically, connect
manually.
26

Connecting an audio device

1
Be sure that both this unit and the
audio device are switched to
Bluetooth signal on.
2
Connect to this unit using the audio
device.
" " appears when the connection is made.
Connecting to registered devices
1
Press (BT).
The Bluetooth settings menu appears.
2
Rotate the control dial to select
"Device List," then press the select
button.
The list of registered devices appears.
3
Select the device to connect.
4
Select "Audio Connect."
"Connection Complete" appears and
connection is complete.
" " appears during connection.
Connecting the last-connected audio
device from this unit
Press (6) with the "Bluetooth Audio" source
selected.
To stop the connection
Select "Audio Disconnect" in step 4.
Deleting the registration of a
connected device
Select "Delete" in step 4.