Step 1 – Pairing (Searching from this unit)
(Bluetooth)
Joystick
When connecting BLUETOOTH devices for the fi rst
time, mutual registration is required. This is called
“pairing.” This registration (pairing) is required only
for the fi rst time, as this unit and the other devices will
recognize each other automatically from the next time.
(Depending on the device, you may need to input a
passcode for each connection.)
Searching for a BLUETOOTH device from this
unit
1
Check that the other BLUETOOTH device is set to
allow for searching (discoverable) beforehand.
2
Press .
1
Select “Connectivity” “Search.”
2
The process of searching for a connectable device
3
begins, then the detected device name(s) appear
in a list. If a device name cannot be received,
“Unknown” will be displayed.
4
3
Select the device to connect.
Pairing starts.
4
Input a passcode.
Input the same passcode for this unit and the
5
connecting device. The passcode can be either your
own selected number or the number determined by
the connecting device.
5
Press the joystick to confi rm.
“Connected” appears and connection is complete.