Customizing The Equalizer Curve - Eq3 Parametric Tune; Adjusting Setup Items - Set - Sony MEX-BT5700U Operating Instructions Manual

AUX Level* 2
Adjusts the volume level for each connected
auxiliary equipment: "+18 dB" – "0 dB" – "–8
dB."
This setting negates the need to adjust the
volume level between sources.
Bluetooth Audio Level*
Adjusts the volume level for each connected
Bluetooth audio device: "+18dB" – "0dB" –
"–8dB."
This setting negates the need to adjust the
volume level between sources.
*1 Hidden when EQ3 Parametric Preset is set to "off."
*2 When AUX source is activated.
*3 When Bluetooth Audio source is activated.
Customizing the equalizer curve
— EQ3 Parametric Tune
"Custom" of EQ3 Parametric Preset allows you
to make your own equalizer settings.
Select "Custom" of EQ3 Parametric Preset.
1
Select a source, then press the select
button.
2
Rotate the control dial to select "EQ3
Parametric Tune," then press it.
3
Setting the equalizer curve.
You can adjust the equalizer center frequency,
volume level and bandwidth in each range
from "Low," "Mid", or "Hi."
1 Rotate the control dial until the desired
menu item appears, then press the select
button.
2 Rotate the control dial to select the
setting, then press the select button.
Selectable frequency in each range:
Low: 60 Hz or 100 Hz
Mid: 500 Hz or 1.0 kHz
Hi: 10.0 kHz or 12.5 kHz
60Hz 100Hz 500Hz 1.0kHz
LOW
Adjustable volume level: "+10 dB" –
"0 dB" – "–10 dB."
+10dB
0dB
-10dB
32
3
10.0kHz 12.5kHz
MID HI
Selectable "Q" settings in each range:
Low: "0.5," "1.0," "1.5," or "2.0"
Mid: "0.75," "1.0," "1.25," or "1.5"
Hi: "0.75," or "1.25"
You can control "Q" (the width of the range
of affected frequencies) with this function.
dB
Q=1.0 1.5 2.0
Repeat steps 1 to 2 to adjust other frequency
ranges.
4
Press (BACK) down twice.
The setting is complete and the display
returns to normal play/reception mode.
To restore the factory-set equalizer curve, select
"Initialize" and "Yes" in step 3.
Tip
Other equalizer types are also adjustable.
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
3
Rotate the control dial to select the
setting, then press the select button.
The setting is complete.
4
Press (BACK).
The display returns to normal play/reception
mode.
Notes
• Displayed items will differ, depending on the source
and setting.
• Cannot display with "Bluetooth Phone" source
selected.
2.0 1.5 1.0
Hz