Download  Print this page

Sony MEX-BT5000 Instruction & Operation Manual

Wireless handsfree and music streaming bluetooth car audio.
Hide thumbs
   

Advertisement

MEX-BT5000
Location of controls and basic operations
Audio function
Main unit
1
2
3
4
5
6
MEX-BT5000
7
8
9
0
qa
Front panel removed
qs
qd
qf
RESET
Warning if your car's ignition has no
ACC position
After turning the ignition off, be sure to press
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and
this causes battery drain.
© 2006 Sony Corporation
Card remote commander RM-X302
Radio:
Push up/down to:
– Receive stored station.
Push left/right to:
– Tune in stations automatically (push).
7
– Find a station manually (push and hold).
1
Press to:
qk
– Display the list.
qg
C MODE button
3
ql
To select the radio band (FM/MW/LW)/select
4
the unit*
5
.
w;
D MENU button
qh
wa
To enter menu.
qa
E Display window
ws
F OPEN button
qj
G OFF button
wd
To power off; stop the source.
H Receptor for the card remote
commander
I AF/TA button
AF (Alternative Frequencies)/TA (Traffic
Announcement), TP (Traffic Programme):
Each time you press (AF/TA), the item changes
as follows:
AF on t TA on t AF/TA on t
A SOURCE button
AF/TA off
To power on; change the source (Radio/CD/
J Number buttons
MD*
1
/Bluetooth AUDIO/AUX).
CD/MD*
1
:
B Joystick/LIST button
(1): REP
Rotate to: Adjust the volume.
(2): SHUF
(5): BBE MP*
6
Push up/down/left/right to: Select a menu item.
To activate the BBE MP function, set
Press to: Apply a setting.
"BBE MP on." To cancel, set "BBE MP
CD/MD*
1
:
off."
Push up/down to*
2
:
(6): PAUSE*
6
– Skip groups*
3
/albums*
4
(push).
To pause playback. To cancel, press again.
– Skip groups*
3
/albums*
4
continuously (push
Radio:
and hold).
To receive stored stations (press); store stations
Push left/right to:
(press and hold).
– Skip tracks (push).
– Skip tracks continuously (push, then push
again within about 2 seconds and hold).
– Reverse/fast-forward a track (push and hold).
K DSPL (display)/PTY (Programme Type)
ws ATT (attenuate) button
To attenuate the sound. To cancel, press again.
button
To change display items; select PTY in RDS
wd VOL (volume) +/– buttons
(press (PTY), then push the joystick up/down to
To adjust volume.
search for the station, and press).
L Disc slot
*1 When an MD changer is connected.
*2 If the changer is connected, the operation is different.
To insert the disc (label side up). Playback starts
*3 When an ATRAC CD is played.
automatically.
*4 When an MP3/WMA is played.
You can play CD-DA (also containing CD
*5 When a CD/MD changer is connected.
TEXT), CD-R/CD-RW (MP3/WMA files also
*6 When playing back on this unit.
containing Multi Session) and ATRAC CD
Note
(ATRAC3 and ATRAC3plus format).
If the unit is turned off and the display disappears, it
M RESET button
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
Detach the front panel and press the RESET
inserted to activate the unit first.
button with a pointed object, such as a ballpoint
pen.
Notes
• Before operating the unit for the first time, or after
replacing the car battery or changing the
connections, you must reset the unit.
• Pressing the RESET button will erase the clock
setting and some stored contents.
N Z (eject) button
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qg ENTER button
To apply a setting.
qh LIST button
To list up.
qj Number buttons
Buttons 1 to 6 share the same functions as the
number buttons on the unit.
qk M (+)/m (–) buttons
The same as pushing the joystick up/down.
ql < (.)/, (>) buttons
The same as pushing the joystick left/right.
w; SCRL (scroll) button
To scroll display item.
wa SOUND button
To select sound items.
Bluetooth function
Main unit
1
2
3
4
5
MEX-BT5000
6
7 8
9
0
Front panel removed
qa
C Bluetooth button
For details on the Bluetooth function, see the
To access the Bluetooth functions; receive a call.
supplied "Enjoy using Bluetooth wireless
D MENU button
technology" or "Operating Instructions."
To enter menu; receive a call.
A SOURCE button
E Display window
To power on; change the source (Radio/CD/
F OFF button
MD*
1
/Bluetooth AUDIO/AUX).
To power off; stop the source; end or reject a
B Joystick
call.
Rotate to: Adjust the volume.
G CALL button
Push up/down/left/right to: Select a menu item.
To access the telephone functions; receive a call.
Press to: Apply a setting.
H Receptor for the card remote
Bluetooth audio device*
2
:
commander
Push left/right to:
– Skip tracks (push).
– Reverse/fast-forward a track (push and hold).
Detaching the front panel/Setting the clock/
Storing stations automatically/Display items/
B
Repeat and shuffle play/Adjusting menu items/
Customizing the equalizer curve
The following buttons on the card remote
Card remote commander RM-X302
commander have also different buttons/functions
7
3
from the unit.
qs ENTER button
6
To apply a setting.
1
qd Number buttons
qs
qg
To input numbers (phone number, passcode,
etc.).
qh
Buttons 1 to 6 share the same functions as the
number buttons on the unit.
4
qf
button
qg M (+)/m (–) buttons
The same as pushing the joystick up/down.
qh < (.)/, (>) buttons
qd
The same as pushing the joystick left/right.
qj VOL (volume) +/– buttons
qj
To adjust volume.
qf
qk
button
qk
*1 When an MD changer is connected.
*2 When a Bluetooth audio device (supports AVRCP of
Bluetooth technology) is connected. Depending on the
device, certain operations may not be available.
I Number buttons
To call stored dials.
Bluetooth audio device*
2
:
(6): PAUSE
To pause playback.
J Bluetooth indicator
Lights up when the Bluetooth signal is input/
output. Goes off when the Bluetooth signal is
off.
K Microphone

Advertisement

Table of Contents

   Related Manuals for Sony MEX-BT5000

   Summary of Contents for Sony MEX-BT5000

  • Page 1 – Skip tracks continuously (push, then push this causes battery drain. again within about 2 seconds and hold). – Reverse/fast-forward a track (push and hold). © 2006 Sony Corporation Radio: K DSPL (display)/PTY (Programme Type) ws ATT (attenuate) button Push up/down to: To attenuate the sound.
  • Page 2 SET UP RADIO Detaching the front panel Setting the clock Storing stations automatically — BTM You can detach the front panel of this unit to prevent The clock uses a 24-hour digital indication. theft. The unit selects strong signal stations and stores Press (MENU).

Comments to this Manuals

Symbols: 0
Latest comments: