Connection Cable (Automobile) - Sony DSX-GS900 Service Manual

DSX-GS900
3-4.

CONNECTION CABLE (AUTOMOBILE)

front side
bottom side
1 Remove the connection
cable (automobile)
from the lead pin.
front side
Press the connection
cable (automobile) in the
direction of the arrow.
– –
CN1004
Note 2: When installing the
connector (CN1004) on
the MAIN board, insert
straight to the connector.
No slanting after insertion.
OK
Insert straight into the interior.
connection
cable
(automobile)
connector
(CN1004)
–
NG
Insert only part way.
connection
cable
(automobile)
connector
–
(CN1004)
NG
Insert at a slant.
connection
cable
(automobile)
connector
(CN1004)
–
17
rear side
Fix the connection cable
(automobile) with the lead pin.
Note 1: Fold the lead pin along
the white line on the
MAIN board.
MAIN
board
front side
CN1004
rear side
–
Lead the connection cable
(automobile) along the white
line on the MAIN board.
Press the connection
cable (automobile) in
the direction of the arrow.
–
MAIN
board
– –
–
rear side
1 Remove the connection
cable (automobile)
from the lead pin.
1 Remove the connection
cable (automobile)
from the lead pin.
2 connection cable (automobile)
CONNECTOR (CN1004)
4 connection cable
(automobile)
OK
The connection cable
(automobile) is not touched
the elect chip (C1425).
connection cable
front side
(automobile)
elect chip
(C1425)
MAIN
board
–
– –
Fix the connection cable
(automobile) with the
lead pin.
The connection
Note 1: Fold the lead pin
cable (automobile)
along the white line
is touched the
on the MAIN board.
choke coil (L1502).
choke coil
(L1502)
Sony CONFIDENTIAL
For Authorized Servicer
3 screw
(PTT2.6 6)
NG
The connection cable
(automobile) is touched
the elect chip (C1425).
connection cable
(automobile)
elect chip
(C1425)
MAIN
board
– – –
Fix the connection cable (automobile)
with the lead pin.
Note 1: Fold the lead pin along the white line
on the MAIN board.
Press the connection
bracket
cable (automobile) in
AMP
the direction of the arrow.
Check that the connection cable
(automobile) is not touched the
edge of bracket AMP.
Press the connection cable
(automobile) to the groove
NG
of the chassis.
–
connection
connection cable
cable
(automobile)
(automobile)
front side
rear side
MAIN
board
chassis
–
SYS SET