Download  Print this page
   

Advertisement

4-138-931-51 (1)
Bluetooth
®

Audio System

Quick Guide for Bluetooth function
This "Quick Reference" manual is to remind you in case you happen to forget how to use the Bluetooth
function on this unit after you have already read the supplied operating instructions. For full details on
operation, see the supplied operating instructions and the Bluetooth device operating instructions.
MEX-BT5750U
©2009 Sony Corporation Printed in Thailand
Available Bluetooth functions
or
OPP
HFP
A2DP
PBAP
 Bluetooth profiles
Profiles are the standardization of the functions for each
Bluetooth device specification. This unit supports the
following profiles:
HFP (Handsfree Profile): Handsfree talking with your cellular
phone in the car (incoming/outgoing call supported).
OPP (Object Push Profile): Phonebook transfer from your
cellular phone.
PBAP (Phone Book Access Profile): Phonebook access to
your cellular phone.
A2DP (Advanced Audio Distribution Profile): Music
streaming from your cellular phone or portable audio device.
AVRCP (Audio Video Remote Control Profile): Basic
playback control from car audio.
3 steps to Bluetooth function
1
2
3
-
A
c
3
-
B
1
Pairing
First, register ("pair") a Bluetooth device (cellular phone,
etc.) and this unit with each other. You can pair up to 9
devices. Once pairing is established, there is no need for
pairing again.
2
Bluetooth connection
Operate the Bluetooth device to make the Bluetooth
connection.
Operate this unit to make the Bluetooth connection to
the recognized device.
3
- Calling on the phone
You can make and receive a call by operating this unit.
3
- Listening to music
You can listen to music played on the Bluetooth device.
About connection
Depending on the device, connection may start after pairing
automatically.
Step 1 –  Pairing (Searching from this unit)
(BT)
Control dial/select button
Searching for a Bluetooth device from this unit
Check that the other Bluetooth device is set to allow for
searching (discoverable) beforehand.
1
Press .
The Bluetooth settings menu appears.
2
Rotate the control dial to select "Search," then
press the select button.
The process of searching for a connectable device
begins, then the detected device name(s) appear in a list.
If a device name cannot be received, Bluetooth Device
Address will be displayed.
Search time varies depending on the number of Bluetooth
devices.
3
Rotate the control dial to select the device,
then press the select button.
4
Select your desired connection, "Handsfree
Connect" or "Audio Connect."
Pairing starts.
5
Input a passcode.
Input the same passcode for this unit and the connecting
device using control dial or card remote commander. The
passcode can be either your own selected number or the
number determined by the connecting device.
For details, see the manual of the connecting device.
6
Press the select button to confirm.
"Connection Complete" appears and connection is
complete.
"
" or "
" appears during connection.
Step 1 –  Pairing (Searching from a Bluetooth device)
XXXX
Control dial/select button
Searching for this unit from a Bluetooth device
Check Bluetooth Settings: "Signal" set to "on" and
"Visibility" set to "Show."
1
Set the Bluetooth device to search for this
unit.
A list of detected devices appears in the display of
the device to be connected. This unit is displayed as
"XPLOD" on the device to be connected.
2
If Passcode input is required on the display
of the device to be connected, input the
passcode.
Input the same passcode (e.g., "0000") for the connecting
device and this unit using control dial or card remote
commander.
This unit and the Bluetooth device memorize each other's
information, and when pairing is made, the unit is ready
for connection to the device.
3
Set the Bluetooth device to connect to this
unit.
"Connection Complete" appears and connection is
complete.
"
" or "
" appears when the connection is made.

Advertisement

Table of Contents

   Related Manuals for Sony MEX-BT5750U

   Summary of Contents for Sony MEX-BT5750U

  • Page 1: Audio System

    ” appears during connection. function on this unit after you have already read the supplied operating instructions. For full details on operation, see the supplied operating instructions and the Bluetooth device operating instructions. MEX-BT5750U ©2009 Sony Corporation Printed in Thailand...
  • Page 2 Disconnect the Customers in Latin America: current connection and search for this unit from another http://esupport.sony.com/ES/LA/ device. The disconnected device can be reconnected by Control dial/select button selecting from the list of registered devices.

Comments to this Manuals

Symbols: 0
Latest comments: