Capture Configuration; Capture Automatically; Capture Manually - HIKVISION DS-2XC6745G0-IZHS User Manual

5.3 Capture Configuration

The device can capture the pictures manually or automatically and save them in configured saving
path. You can view and download the snapshots.

5.3.1 Capture Automatically

This function can capture pictures automatically during configured time periods.
Before You Start
If event-triggered capture is required, you should configure related linkage methods in event
settings. Refer to Event and Alarm for event settings.
Steps
1. Go to Configuration → Storage → Schedule Settings → Picture Capture .
2. Set capture schedule. Refer to Set Arming Schedule for configuring schedule time.
3. Set the capture type.
Scheduled
Capture a picture at the configured time interval.
Event-Triggered
Capture a picture when an event is triggered.
4. Set the Format, Resolution, Quality, Interval, and Capture Number.
Note
The resolution of the captured picture is the same as the resolution of the captured picture
stream. You can select Stream Type in Advanced.
5. Click Save.

5.3.2 Capture Manually

Steps
1. Go to Configuration → Local .
Network Camera User Manual
Figure 5-1 Set Capture Schedule
34