Chapter 3 Capture Configuration
3.1 Set Smart Monitoring Capture
The smart monitoring mode supports capturing motor vehicles, non-motor vehicles, and
pedestrians via video triggering.
Steps
1. Go to Configuration → Capture → Application Mode.
2. Select Application Mode as Stitching Capture.
3. Set parameters.
Driving Direction
The driving direction of the vehicle。
Lane No.
The corresponding lane No. linked with the current lane. The lane No. will be overlaid on the
captured picture.
Motion Detection Threshold
It is the position of the upper lane line boundary in the image.
Sensitivity
Tyre and Axle Recognition Unit User Manual
Figure 3-1 Set Smart Monitoring Capture
5