Note
The function is only supported by certain models. The actual function varies according to
different models.
7.1.5 Set Alarm Input
Alarm signal from the external device triggers the corresponding actions of the current device.
Before You Start
Note
This function is only supported by certain models.
Make sure the external alarm device is connected. See Quick Start Guide for cable connection.
Steps
1. Go to Configuration → Event → Event and Detection → Alarm Input .
2. Select an Alarm Input NO. and click
3. Select Alarm Type from the dropdown list. Edit the Alarm Name.
4. Check Enable Alarm Input Handling.
5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
6. Click Copy to... to copy the settings to other alarm input channels.
7. Click Save.
7.2 Smart Event
Note
For certain device models, you need to enable the smart event function on VCA page first to
●
show the function configuration page.
The function varies according to different models.
●
7.2.1 General Settings
Set the general parameters which are related to the smart applications.
Go to VCA → Set Application → General Settings to set the following parameters.
FTP
For FTP settings, refer to Set FTP .
Network Speed Dome User Manual
to set alarm input.
50