Section 2
Operation
View Total Operating
2-18
MaxQ SHKE8000 Series Shakers
To view this information, open the Configuration menu by pressing the
down arrow, up arrow, and the Silence button, and then the down arrow
Hours
three times, in the sequence shown below.
The screen at the right will appear
on the display.
Pressing the Time button beneath
RunHrs shows the total
accumulated run hours as
displayed at right. When finished,
press any of the three buttons
(Time, Speed, or Temp) to save
the new setpoint value and return to the previous screen, or press nothing
for about 15 seconds to save the new setpoint value and return to the
Operating Screen.
Heat %
Heat percentages are intended for factory use only, and can be helpful in
troubleshooting the heat control system.
To view this information, open the Configuration menu by pressing the
down arrow, up arrow, and the Silence button, and then the down arrow
three times, in the sequence shown below.
The screen shown at the right
will appear on the display.
Press the Temp button beneath Heat %.
Actual
Total Run Time:
Setpoints
Hours
Thermo Scientific
XX