Table of Contents
Advertisement
Section 2
Operation
RPM Tracking
Toggle the RPM Tracking alarm with
Actual
RPM Tracking:
On
either the up (On) arrow or the down
Setpoints
Next
(Off) arrow. Pressing the Next
(temperature) button advances the
display to the next alarm, saving the
RPM Tracking setting to memory. If no buttons are pressed, the display
will automatically return to the Operating Screen after about 15 seconds,
saving the selection to memory.
Check Belt
Toggle the Check Belt alarm with either
the up (On) arrow or the down (Off)
arrow. Pressing the Temp button
beneath Next advances the display to the
next alarm, saving the Check Belt setting
to memory. If no buttons are pressed, the display will automatically
return to the Operating Screen after about 15 seconds, saving the selection
to memory.
Temperature Sensor Fault
Toggle the Sensor Fault alarm with either
the up (On) arrow or the down (Off)
arrow. Pressing the Temp button
beneath Next advances the display to the
next alarm, saving the On/Off setting to
memory. If no buttons are pressed, the display will automatically return to
the Operating Screen after about 15 seconds, saving the selection to
memory.
Temperature High or Low
Toggle the Temp High/Low alarm with
Actual
Temp. High/Low:
On
either the up (On) arrow or the down
Setpoints
Return
(Off) arrow. Pressing the Temp button
beneath Return returns the display to the
previous screen, saving the On/Off
setting to memory. If no buttons are pressed, the display will automatically
return to the Operating Screen after about 15 seconds, saving the selection
to memory.
Whether the unit has been operated in the Hold or Countdown modes,
and/or has been turned off and unplugged many times, the microprocessor
control system maintains a running total of platform operating hours.
Thermo Scientific
MaxQ SHKE8000 Series Shakers
2-17
Advertisement
Table of Contents
