Table of Contents
Advertisement
Section 5
Specifications
5-4
MaxQ SHKE8000 Series Shakers
Safety Specifications
Indoor Use Only
Altitude
. . . . . . . . . . . . . . . . . . . . . . . 2,000 meters
Temperature
. . . . . . . . . . . . . . . . . . . . 5°C to 32°C
Humidity
. . . . . . . . . . 80% RH at or below 32°C,
decreasing linearly to 50% RH at 32°C
Mains Supply Fluctuations . . . . . . . . . . . . . . . . ±10%
Installation Category II
2
Pollution Degree 2
Class of Equipment I
Climatic Condition - ST (EN 60335, Subtropical)
Fluorinated Greenhouse Gases
Compliant with REGULATION (EU) No 517/2014 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL on fluorinated greenhouse gases.
This product contains fluorinated greenhouse gases in a hermetically sealed
system. This product contains foam blown with flourinated greanhouse
gas, R-245fa. If a leak in the sealed system is detected, the operator shall
repair without undue delay.
The following model is designed with the following amounts of fluorinated
greenhouse gases:
Model
Refrigerant
SHKE8000-8CE R-134a
_________________________________________
1 Installation category (overvoltage category) defines the level of transient overvoltage
which the instrument is designed to withstand safely. It depends on the nature of the
electricity supply and its overvoltage protection means. For example, in CAT II
which is the category used for instruments in installations supplied from a supply
comparable to public mains such as hospital and research laboratories and most
industrial laboratories, the expected transient overvoltage is 2500V for a 230V sup-
ply and 1500V for a 120V supply.
2 Pollution Degree describes the amount of conductive pollution present in the operat-
ing environment. Pollution Degree 2 assumes that normally only non-conductive
pollution such as dust occurs with the exception of occasional conductivity caused by
condensation.
1
Amount (kg)
0.298
GWP
1430
Thermo Scientific
Advertisement
Table of Contents
