Turn The Audible Alarm On And Off - Thermo Scientific MaxQ SHKE8000 Series Operating And Maintenance Manual

Section 2
Operation
Change Configuration
(continued)
Turn the Audible Alarm
On and Off
2-12 MaxQ SHKE8000 Series Shakers
During the following configuration procedures, menu options are given to
either modify a setting as it appears in sequence, or scroll past to the next
item. If no selection is made by pressing a button or arrow, the display
reverts to the Operating Screen in about fifteen seconds. The complete
configuration menu is shown in the chart at the end of this section.
Note In these procedures, values and settings for time, temperature, speeds,
alarms, and so forth are shown on the display screens. These numbers are
for example only and may not be the values encountered when
programming your unit.
Open the Configuration menu by pressing
the down arrow, the up arrow, and the
Silence button, and then the down arrow
once again, in the sequence shown at right.
The screen at right will appear on
the display.
Next, press the Time button
beneath Audible. The screen at
right appears.
Press the up or down arrow to turn the audible alarm function on or off.
Press any of the three buttons (Time, Speed or Temp) to save the new
setpoint value and return the display to the previous screen, or press
nothing for about 15 seconds to save the new setpoint value and return the
display to the Operating Screen.
When the audible alarm is disabled, a warning message displays in the
Setpoint portion of the Operating Screen
as shown at right.
1
Press
Audible Alarm:
Actual
Setpoints
4
3
2
On
Thermo Scientific