Table of Contents
Advertisement
Quick Release
Platform
Thermo Scientific
The quick release platform base is shipped already installed in the unit.
1. To load the platform, open the chamber door.
2. Grasp the center handle, pull the inner release bar upward, then press
the handle downward until it clicks into a horizontal position.
3. Pull outward on the platform. Load your samples, making sure all are
securely fastened. Push the platform all the way into the chamber.
4. Pull up on the inner release bar and press the center handle upward
into a vertical position. The door to the chamber may now be closed.
Figure 1-31. Handle When Loading
Note The platform must be fully
inserted into the cabinet and the center handle pressed into the 'up'
position to ensure the platform is secured.
Figure 1-32. Handle Up to Close Door
s
MaxQ SHKE8000 Series Shakers
Section 1
Installation
1-17
Advertisement
Table of Contents
