Ai Event Management; Face Recognition; Face Detection Settings - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs

9.1 Face Recognition

Only some models support alarm based on face match. If your device does not support face
recognition function, please skip the face database, and face recognition instructions.
Please set face recognition function according to the following procedures for the first time.
Set face detection and alarm linkage
and set successful recognition (or stranger)
linkage

9.1.1 Face Detection Settings

Face Detection: Alarms will be triggered if someone intrudes into the pre-defined alarm areas.
① Click StartàSettingsàAI/EventàAI EventàFace Recognitionà Detection to go to the
following interface.
② Select the camera, check "Enable Detection by IPC" and set the duration.
Note: Some models may support face detection by NVR. For these models, the camera without

9 AI Event Management

à
Add face group Add faces to the face group
à
Set successful recognition (or stranger) alarm
à
86
Enable
à