Image Settings; Mask Settings - Vitek Transcendent VT-TNR Series User Manual

4, 8, 16, 32, 64, and 128 channel 8 megapixel h.265 real time network video recorders with 4k hdmi output

Table of Contents

VITEK Industrial Video Products – Transcendent Series NVRs

5.4.2 Image Settings

Click StartàSettingsàCameraàImageàImage Settings to go to the following interface. Select

the camera and then set the brightness, contrast, saturation and hue of the camera. Click the

"Advanced" button or

"Image Adjust" interface and then set the relevant setting items. Please refer to 5.4.5 Image

Adjustment for detailed introductions of these items.

You can click "Default" to restore the image settings to the default factory settings.

Some areas of the image can be masked for privacy. Up to four mask areas can be set for each

camera. Click StartàSettingsàCameraàImageàMask Settings to go to the interface as shown

below.

Select the camera and enable the mask. Click the "Draw" button and then drag the mouse on

the image area to set the mask area; click the "Delete" button to delete the mask areas; click

"Apply" to save the settings.

in the camera list on the right side of the interface to pop up the

Table of Contents