Date And Time Configuration; Recorder Osd Settings; Factory Default - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
Main Output: Enable "Fixed display resolution" and then select the main output as needed.
Note: You can set the resolutions of the main output and secondary output respectively if the
NVR has dual outputs. Refer to the picture as shown below.
Dwell Automatically: Switch automatically. Check it and set "wait time".The system will switch
images automatically if it is not operated during the time you set.

13.2.2 Date and Time Configuration

Click StartàSettingsàSystemàBasicàDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the NVR. The default time zone
is GMT-8 Las Vegas, San Francisco, Vancouver. If the selected time zone includes DST, the DST
of the time zone will be checked by default. Click "Apply" to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select "Manual" in the "Synchronous" option and then click
Time" option to set the system time.
NTP: select "NTP" in the "Synchronous" option and then enter the NTP server.

13.2.3 Recorder OSD Settings

Click StartàSettingsàSystemàBasicàRecorder OSD settings to go to recorder OSD setting
interface. OSD name and icon can be enabled here.

13.3 Factory Default

Click StartàSettingsàSystemàMaintenanceàFactory Default to go to the following interface.
Please choose the item as needed.
155
after the "System