Exception Detection - Vitek Transcendent VT-TNR Series User Manual

VITEK Industrial Video Products – Transcendent Series NVRs
② Enable line crossing counting.
③ Check "Draw line" and then drag the mouse on the small window to draw the crossing line.
Uncheck "Draw line" to finish the drawing. Click "Clear" to delete the alert line.
Direction: A->B and A<-B are optional. It is the crossing direction of the target that crosses over
the alert line.
④ Check "Statistical OSD", the statistical information will be displayed on the live view
interface.
⑤ Set the reset information. You can set reset information manually or enable "Auto Reset" as
needed.
⑥ Click the "Detection Target" tab to set the detection target, including people, vehicle and
non-vehicle.
⑦ Click "Apply" to save the settings.

9.8 Exception Detection

Exception Detection Configuration:
① Click StartàSettingsàAI/EventàAI EventàException Detection to go to the following
interface.
102